Product ID:THERMOFIT S-1005 ADHESIVE, SERIAL NO: 3001
MSDS Date:01/01/1987
FSC:8040
NIIN:00F005103
MSDS Number: BBRSY

Emergency Phone: (415) 361-3333

Cage: FO008

Telephone: 650-361-4907

Cage: FO008

POLYAMIDE RESIN

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Effects of Overexposure:SKIN/EYE/NOSE/THROAT IRRIT. MAY BE IRRITATING
IF INGESTED, BUT ISN'T KNOWN TO HAVE OTHER HARMFUL.

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
W/MILD SOPA/WATER. CONSULT PHYS IF ALLERGIC SYMPTOMS DEVELOP.
INGESTION: DON'T INDUCE VOMITING. DILUTE W/WATER OR MILK. SEEK MED
ATT. INHALATION : REMOVE TO FRESH AIR. SEEK MEDICAL ADVICE.

Flash Point:365F
Extinguishing Media:CO2, WATER, DRY CHEMICAL, FOAM
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY BE INVOLVED IN A FIRE.
WEAR SCBA IN ENCLOSED AREAS.

Spill Release Procedures:REMOVE WITH INERT ABSORBENT MATERIAL, USING
APPROPRIATE PRECAUTIONS TO PREVENT CONTA OR OTHER EXPOSURE. CLEAN
UP RESIDUE WITH SOAP AND WATER.

Handling and Storage Precautions:CURING OF ADHESIVE SHOULD BE DONE IN A
WELL-VENTILATED AREA. THE CURING PROCESS IS EXOTHERMIC.REVENT
CONTACT WITH SKIN AND EYES.
Other Precautions:WASH HANDS THOROUGHLY AFTER USE. USE ONLY WITH
ADEQUATE VENTILATION.

Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:PROTECTIVE EQUIPMENT/PROVIDED AS NECESSARY
TO PREV CONTACT.
Supplemental Safety and Health
MSDS DATED: 05/86.

Spec Gravity:0.970
Solubility in Water:MODERATE
Appearance and Odor:VISCOUS, TAN LIQUID WITH AMMONIA-LIKE ODOR.
Percent Volatiles by Volume:NEGL

Stability Indicator/Materials to Avoid:YES
DECOMP PRODUCTS ARE LIKELY TO BE TOXIC/SHOULDN'T BE INHALED.
Stability Condition to Avoid:MAY REACT RELEASE HEAT W/ACIDS/STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY INCLUDE
CO/CO2/ACIDS/ALDHYDES/NITROGEN COMPOUNDS.

Waste Disposal Methods:NORMAL METHODS BASED ON FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.